|
|
| We've
Got You Covered Across the Board!
From the world leader in
mission-critical telemetry systems comes a new line
of standalone boards that simplifies system integration
and lowers costs. Our boards deliver the highest performance,
the most functionality, and the best value you'll find
anywhere. What’s more, because our boards have
been put to the test in our own systems, they're guaranteed
to deliver exceptional performance in yours.
Software Included!
To get your system up and running fast, many of our
boards are delivered with a real Windows driver plus
a sample executable. Drivers are optimized for the
fastest possible speed, providing DMA directly into
memory when applicable. Now you can get all your
data to disk, all the time and reserve CPU resources
for your most mission-critical tasks.
We provide sample applications and sample source code
for each board to make life a little easier when you
want to write your own driver software. In some cases
full drivers are supplied and in others we provide
you with the tools you need to write your own driver.
And of course, each board comes with the documentation
you need to get started. Consult with the factory on
available documentation, source code, drivers, and
application requirements. |
 |
ADP800 -Analog & Digital Ports Daughter Card
- Plug-in module fully compatible with MFT800
- Up to 16 analog outputs
- 12 bit digital to analog conversion
- Up to 18 digital I/O - individually programmable as inputs or outputs
- Fully independent analog and digital channel control
- Real-time sample rates to 50 ksps per channel
- Streaming data from host PC at up to 1.6M parameters/sec
|
|
Bit Synchronizer Board (20 Mb)
- Reconstructs degraded PCM signal
and creates a clock
- Operates to 20 Mbps
- Outputs selectable PCM code
- Locks onto signal within 10 data
transitions
- Optional Viterbi decoder and convolutional
encoder
|
|
PCI Decom/Simulator Boards
- Accepts NRZ-L PCM streams to 20
Mbps
- 32K words per frame (reconfigurable
to 64K)
- Provides two asynchronous embedded
serial stream outputs
- On-board simulator can exercise
all primary frame/subframe modes (not available
if configured for 64K word operation)
- Supports SFID, URC, FCC, or unique
subframe sync
|
 |
Multifunction PCI Telemetry Module
- Supports reconfigurable combinations
of bit syncs, decoms, simulators, and IRIG time
code generators
- Simultaneously decommutates two
PCM streams, each to 20 Mbps
- Supports 32K words per frame,
reconfigurable to 64K
- Generates IRIG-A, -B, or -G time
- Synchronizes internal time to
an external IRIG-A, -B, or -G time source
- Simulates telemetry data and formats
at any rate to 20 Mbps
- PCI bus compatible — two independent
DMA controllers offload host from moving data off
the board
|
 |
Multifunction PCIe Telemetry Module
- Dual stream design saves bus slots
- Bus-mastering DMA channels can support both input and output channels
- Extract clock and data from noisy PCMdata streams at rates to 30 Mbps
- Decode, translate, or generate IRIG-A, -B, or -G time
- Time tag PCM input frames with1 micro second resolution optionally synchronized to an external source
- Status tag PCM input frames, including sync state, bit slip, CRC error detection
- Extract two asynchronous embedded frames, or fully decommutate a primary and an embedded stream
- Simulate telemetry data and formats to 30 Mbps
|
|
|
